包邮
关注:116
超声波传感器UC6000-30GM-IUEP-IO-V15
一般特性 |
感应距离 |
350 ... 6000 mm |
调节范围 |
400 ... 6000 mm |
盲区 |
0 ... 350 mm |
标准目标板 |
100 mm x 100 mm |
换能器频率 |
approx. 65 kHz |
响应延时 |
minimum : 140 ms
Ex works settings: 280 ms
电气特性 |
工作电压 |
10 ... 30 V DC , ripple 10 %SS
15 ... 30 V voltage output |
空载电流 |
≤ 60 mA |
功耗 |
≤ 1 W
输入/输入 |
Input/output type |
1 synchronization connection, bidirectional |
|
0 Level |
0 ... 1 V |
|
1 Level |
4 V ... UB |
|
¿¿¿¿ |
> 12 kΩ |
|
输出额定工作电流 |
< 12 mA |
|
脉冲长度 |
0.5 ... 300 ms (level 1) |
|
Pulse interval |
≥ 74 ms (level 0) |
同步频率 |
|
|
普通工作模式 |
≤ 13 Hz |
|
多重模式 |
≤ 14 Hz / n , n = number of sensors , n ≤ 10
(factory setting: n = 5 ) |
输出 |
输出类型 |
1 push-pull (4 in 1) output, short-circuit protected, reverse polarity protected
Current output 4 mA ... 20 mA or
voltage output 0 V ... 10 V configurable |
额定工作电流 |
200 mA , short-circuit/overload protected |
电压降 |
≤ 2.5 V |
分辨率 |
current output: evaluation range [mm]/3200 but ≥0.35 mm
voltage output: evaluation range [mm]/4000 but ≥0.35 mm |
特性曲线偏差 |
≤ 0.2 % of full-scale value |
重复精度 |
≤ 0.1 % of full-scale value |
开关频率 |
≤ 1.5 Hz |
迟滞范围 |
设定的检测范围的1 % (缺省设置), 可设定 |
负载阻抗 |
current output: ≤ 300 Ohm
Voltage output: ≥ 1000 Ohm |
温度漂移 |
≤ 1.5 % from full-scale value (with temperature compensation)
≤ 0.2 %/K (without temperature compensation) |
|
|
咨询